We have exactly what you need!
You just need a tree saver strap like the Bulldog Winch Tree Saver Strap # BDW20015. This strap is designed to be more forgiving on the trees, while still providing the strength needed to recover your Jeep with a 10,000-lb WLL (working load limit).
And that's the way the cookie crumbles. view full answer...
I recommend using the Superwinch SX10SR Integrated Off-Road Winch # SW39GR with the Westin HDX Winch Mount Grille Guard # W36CQ. This winch is rated for 1,000lbs which exceeds the weight of your 2023 Ford F-150. It allows for use with an included wireless remote or wired remote. The winch comes with 85' of 3/8" synthetic rope which is as strong as steel cable but weighs much less and is safer to use.
Be sure to get a Winch Accessory Kit # CU53XR which will provide you with a snatch block,... view full answer...
I recommend using the ComeUp Seal Gen2 Off-Road Winch # CU295057 with the Westin HDX Winch Mount Grille Guard # W54MV on your 2023 Ford Ranger. This winch allows for use with a wired or wireless remote making it easier to use if you are by yourself. The synthetic rope is also much safer than using a steel braided cable.
The Winch Accessory Kit # CU93XR will provide you with gloves, a snatch block, shackles, a tree saver, a strap and storage bag for all your needs. view full answer...
For this application, I reached out to my contact at Bulldog Winch and we came up with what we believe is what you will need based on the information you gave me. There are many factors involved here, so we are trying to cover all the bases for you and make it easy. I will give you our recommendation for using the oak tree to mount the winch, and using the 4x4 truck to power it.
I recommend the Bulldog Winch Standard Series Off-Road Winch - Wire Rope - Roller Fairlead - 8,000 lbs, #... view full answer...
Assuming you are cutting a notch on the fall side of the tree, you should have no problem using a tow strap, like part # EM59802 to pull the tree down. In fact, it is a good idea to use a guide like a rope, strap or chain to help ensure the tree will fall in the direction you want. You could even go with a lower rated strap, like part # H10177, since it will be acting as a guide rather than pulling the entire tree.
Simply relying on gravity could turn into a guessing game when cutting... view full answer...
I recommend the Tourney Pro Transom Saver # 315-FXJ for your 5'x8' plastic boat. The transom saver is definitely recommended with the lightweight plastic boat you have. With this transom saver you can mount it to the trailer by sliding it onto a Keel Roller # YR12244-125EC or attaching the quick release adapter onto your trailers frame. It can extend from 24" to 36" in length by 3" increments. view full answer...
The Covercraft SeatSaver Custom Seat Covers # SS7466PCCH that you referenced were custom designed to fit the second row of all models of the 2015 Mitsubishi Outlander Sport so I can guarantee it will fit your vehicle very well.
It uses a slip-on design that will install easily and will stay in place. view full answer...
Unfortunately there is no way that a one ton winch like the Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle - 2,000 lbs # DL11004 will work to pull that one tone tree up a 25 foot hill with 28 degree slope. Winches have the ability to pull their listed load on level ground. Your inline will add just over 50% so you'd multiply the capacity by about 1.86 according to the attached article. The closest we would then have is the Fulton High-Performance 2-Speed Trailer Winch with... view full answer...
The SnapRing TireSavers Tire Covers White # ST7001WH is exactly what you are looking for. They are Made in the USA and offer the simplest installation with no tools or straps needed. See video below showing how they hug the tire to protect it. If you prefer Black covers we have those as well SnapRing TireSavers Tire Covers Black # ST7001BK. They both come as a set of 2 so be sure to order 1 kit per axle that you are wanting to protect. view full answer...
I recommend using Adco SFS AquaShed Cover # 290-46002. It is designed for bumper pull trailers with up to a 12' box length. It does include zippered panels on the side and rear so that you can still access your trailer while the cover is in place. There are cinch ropes as well as straps with buckles to give you a snug fit that wont blow off from the wind.
Don't forget a set of SnapRing TireSavers Tire Covers # ST7001WH. These will fit tires from 27"-29" diameter. They will help keep the... view full answer...
For your travel trailer I recommend using the SnapRing TireSavers Tire Covers # ST7000BK. These are the easiest tire covers to install which means no more crawling under the camper to secure the strap like you do with most tire covers like the # CAM45246. With the easy installation you will use them more often which will protect your tires and extend their life. These covers come as a 2 pack so be sure to get one pack for each axle on your trailer.
For the spare tire the Adco Spare Tire... view full answer...
Winches can typically handle at least twice their rated weight capacity when they are pulling a boat onto a trailer that has standard bunk boards. If your PVC rollers allow your 1,000 lb pontoon to move easily then I recommend going with the Fulton F2 # FW16000101.
This is a rust-resistant, cast aluminum frame that is fully enclosed. It is rated for 1,600 lbs and comes with a strap rated for the same weight. Using a strap in harsh conditions is much better than a cable because a strap... view full answer...
An easy to remove black tire cover is the Covecraft SnapRing TireSavers # ST7002BK. Your tires are going to measure between 30 and 31 inches so these will be a great fit. It installs extremely easily because of the spring-steel snap ring. There are no straps or buckles that need to be secured.
I've attached a review video for you to take a look at and see how easy the installation is. view full answer...
It may be that your tire covers are a fit for a slightly smaller tire. Your 245/70-19.5 size tires will have a 33" diameter so I recommend using the SnapRing TireSavers Tire Covers # ST7003WH which are designed to fit tires with 33" - 35" diameters. The best thing about these covers is that they use an internal ring that you stretch out and then release once the cover is around the tire to secure it. This keeps you from having to reach behind the tire to secure bungee cords or other types... view full answer...
We do have some mirror choices that will work with your 2015 Yukon XL.
The 2015 Yukon XL is the first model year of the 12th generation of that vehicle, so the mirrors have changed enough that the # LVT-1800 you referenced won't fit.
I've checked with Cipa, Longview and K-Source, and none of them offer a custom slide or snap-on extended towing mirror for the 2015 Yukon XL. You'd need to use a universal mirror like the K-Source Clip-On mirror, part # KS3891. The mirror uses ratcheting... view full answer...
Since your overall tire diameter is 37-1/2 inches, I recommend the Adco Ultra Tyre Gard RV Wheel Covers, Item # 290-3950, which include two covers that fit tires with diameters between 36-39 inches. These covers have a bungee-ball fastening system, washable material, reinforced grommets, and double-needle stitching for durability. They include a 3-year warranty.
For another option, I recommend our SnapRing TireSavers Tire Covers, Item # ST7004WH, which also come in a set of two. These... view full answer...
For both the front and rear tires on your Tiffen Allegro Open Road RV I strongly recommend the Covercraft SnapRing TireSavers Tire Covers in Black # ST7004BK.
These are designed for tires that measure 36 to 39 inches in diameter and their SnapRing design allows for simple installation that requires you to just stretch it over the front of the tire and let the ring snap back into place. This makes them a great option for dually tires like what you have on the rear axle since you won't... view full answer...
The Talon Series Winch, # SW1612201, that you referenced is a large winch and may be overkill for your truck. The Talon winches are high-performance recovery winches that they will have a faster line pull, an adjustable clutch, an upgraded remote and they offer a synthetic rope option that will not bind or fray like the steel cables.
For your 2003 Ford F-250 Diesel, I recommend looking at the Rock 98 Off-Road Winch, # SW1698201. We have installed this on a 2004 F-250 and made a demonstration... view full answer...
We have designed different products to solve a specific problem, but not all at once. For all your attachments that do not have a threaded hitch pin hole, we use this anti rattle device # e99007. This is great for the two inch hitch accessories that come with just a hitch pin. If you have one of our products like one of our etrailer cargo carriers # e98874 you can use our LOCKING anti rattle bolt # e99047. Our carriers come with anti rattle bolts, but this one allows you to lock it to your... view full answer...
While we do have some mirror choices that will work with your 2015 Yukon XL, none of them are custom fits since the 2015 Yukon XL is the first model year of the 12th generation of that vehicle, so the mirrors have changed enough that the # LVT-1800 you referenced won't fit.
We have checked with Cipa, Longview and K-Source, and none of them offer a custom slide or snap-on extended towing mirror for the 2015 Yukon XL. You'd need to use a universal mirror like the K-Source Clip-On mirror,... view full answer...
Go To Results